#stedfloor #marblefloor #3dfloor #metallicfloor Moisture meter V1-D4 Professional - https://de.wolff-tools.com/detail/pro... STEDFLOOR Online Shop - https://www.stedfloor-shop.de/ Company name: STEDFLOOR Owner. Igor Sperling Bukarester Weg 5 67069 Ludwigshafen E-mail: [email protected] Mobile: 0157-74182985 Phone: Tel.: 0621-59285448 Professional hand covering roller: https://www.ebay.de/itm/Profi-Handabd... Decorative design floor. Remmers homepage - https://www.remmers.com/de In commercially used properties, such as food stores or fashion boutiques, as well as in representative areas such as offices, conference rooms and foyers, decorative floor systems create a pleasant, feel-good atmosphere thanks to their high recognition value, optimal walking comfort, increased slip resistance and good cleanability. Epoxy resin floor coating with a metallic look with very good UV stability and a matt, non-slip polyurethane seal for light loads. Construction site setup Check/record of the floor surface temperature, room temperature, humidity Check/record of the dew point (incl. consumables, Profi Premium Goldband Masker, painter's masking tape, cleaning) Floor sanding Work, cleaning and vacuuming Priming the surface - Remmers Epoxy ST 100 Transparent primer and mortar resin. Remmers Epoxy ST 100 primer. Mixing ratio: 3kg + 1kg (A+B) component. Consumption 4.0kg for 10.5m². Processing time / pot life Approx. 20 minutes 20°C Optional leveling layer - Remmers Primer PF (RAL 7001) Scratch filler Mixing ratio: 5.8kg + 1.2kg + 3.5kg (A+B+Selectmix 01/03) component. Consumption: 10.5kg for 10m² floor area. Processing time / pot life Approx. 20 minutes 20°C Remmers Epoxy UV 100 Low-yellowing, transparent epoxy resin. Consumption: approx. 2.8-3.0kg/m². Mixing ratio: 10 kg Epoxy UV 100 (A component) + 500 ml Metalufloor Chartreux (mix for 1 minute) + 5 kg hardener (mix for 3 minutes) + 15 kg Selectmix SBL (no longer in stock) or 15 kg quartz sand 0.1-0.3 mm (mix for another 1-2 minutes) and pour immediately onto the floor and spread with a 3.8-4.0 mm notched squeegee. After approx. 10 minutes, smooth the floor surface with a smoothing trowel. Coverage 30.5 kg for approx. 10-10.5 m² Remmers PUR Aqua Top 500 2K M Sealant + 3% polymer granulate ADD 250 Transparent, silky matt sealant. Per work step: 0.18-0.20 kg/m². When diluted with water, consumption increases depending on the amount of water added. Properties:  Individual characteristics  Metallic marble look  Good mechanical resistance  Anti-slip surface Application  Reception halls  Meeting rooms  Shops and boutiques Test certificates *  Anti-slip R 9-10  Test for rear moisture penetration (Epoxy Primer PF)  Chemical resistance list  Fire class test *Detailed information can be found in the currently valid technical data sheet / system structures and the respective test certificate. Test certificates may only apply to the respective product, so the above system is not necessarily part of the approval. Different R classes can be achieved by exchanging the seal and infill material. Design flooring contains characteristics / textures. Our Metallic Epoxy is a next generation system containing 100% pure solids with the finest raw materials containing proprietary additives for working time, thickness, cloudiness and marbling that are critical to achieving our dynamic effects. Our Metallic Epoxy is a decorative, durable and chemical resistant coating available with a High Gloss or Matte finish. If you can paint your flooring then you are more than qualified to install a STEDFLOOR-REMMERS kit. Our Metallic Epoxy Floor System leads the decorative resin industry for thickness, durability and scratch resistance with our High Wear Top Coats. ►Metallic Epoxy Floor coating Metallic Epoxy Resin Floor Epoxy Resin Floor Coating - • Metallic Epoxy Floor coating Old B... ►Good Tool Shop - https://www.polyplan.com/ Homepage: http://stedfloor.de/ Subscribe to my YouTube channel so you don't miss the new High Tech.