256 views
In this video we will show an integrated topographic survey using multiple technologies: GPS/GNSS, Total Station and Mobile Laser Scanner. Each technology performed its survey independently and rigidly. Each survey was rototranslated on common points to adhere to a single coordinate system. ________________________________________________ Below is the equipment used Leica TS16 Total Station Leica GS16 GNSS with corrections provided by Full GNSS Unlimited by HxGN SmartNet SLAM GeoSLAM ZEB Horizon with ZEB Vision GESI InterSLAM device for local and remote communication and control of SLAM data ________________________________________________ Below is the software used to achieve the results shown in this video. GESI Convy for the projection of points from the ETRF2000 geographic coordinates acquired in the field to the UTM-ETRF2000 and ROMA40-GaussBoaga flat projected coordinates GESI CSV2ALL for joining multiple GPS campaigns, checking the tolerances and for automatically joining the points with discontinuity lines based on the coding used during the survey Strato for the management of the measurement books coming from the total station, of the polygons, of the points and of the discontinuities BricsCAD for all the CAD processes and for showing most of the contents of this video Faro Connect for the processing of SLAM data GESI TrajSLAM for extracting the correct coordinates of the stationings of the individual SLAM campaigns PointCab for rototranslating the SLAM campaigns on the known points CloudCompare for the verification of the convergence of the point clouds and for the immersive animation in the point cloud