40,276 views
In the seventh part of the Long Wood Turning series, Simon Hope turns an eccentric candlestick. The project is much more demanding than the previous ones and requires practice and routine with the usual tools, as well as simple eccentric projects. 00:00 - Introduction to the project 00:40 - Mark distances and clamp the blank 03:30 - Remove edges and turn the basic shape 04:30 - Center the workpiece, i.e. make the ball cylindrical, remove material 06:10 - Remove material on the left and right to finally shape the ball 08:40 - Finishing work with the chisel - ATTENTION! For this step, you will need some experience in using the chisel. 09:00 - Grind the center of the workpiece, i.e. the ball and the left and right sides 10:00 - Turn and shape the left and right sides cylindrically 15:50 - Rework details with the chisel 16:40 - Farewell Tools that were used in this video: Stratos FU 230 wood lathe: https://www.drechselbedarf-schulte.de... Hope CRYO spindle form tube 13 mm: https://www.drechselbedarf-schulte.de... Hope Deluxe Midi handle: https://www.drechselbedarf-schulte.de... Multi-prong driver with pressure tip: https://www.drechselbedarf-schulte.de... Sanding cloth: https://www.drechselbedarf-schulte.de... Online shop for wood turning supplies: https://www.drechselbedarf-schulte.de/ Facebook: / drechselbedarf.schulte Instagram: / drechselbedarf.schulte