About PENOSIL EPS&XPS SpeedFix adhesive foam: https://penosil.com/lt/statybiniai-kl... In this video, you will learn how to do house facade insulation yourself, and which product will help you do it much easier and simpler. Everyone at home wants to live cozy and warm, but at the same time they don't want to pay a lot of money for heating the house in winter. If the walls of the house are poorly insulated, you will have to shake your wallet in the winter. But not only that. In a poorly insulated house, moisture is more likely to accumulate, as a result of which fungi and mold accumulate in the future. So, if you want to live comfortably and warmly, you must take care of good and high-quality insulation of the facade walls. Most often, people use cement mixtures to glue polystyrene foam. However, anyone who has worked with cement glue knows how much trouble it is to work with it. So it's better to save your strength for working with cement mixture for reinforcement work and save time and effort together with Penosil EPS&XPS SpeedFix adhesive foam. You will be able to glue various heat-insulating materials with them, both stone wool and polystyrene foam, wood and even plasterboard. This glue sets quickly. Adhesive foam has good thermal resistance. Withstands a weight of up to 8 tons, so nailing when gluing the facade is really not necessary. Here you can see everything you will need for facade warming works. Penosil adhesive foam. The foam gun sprays them. Cleaner - for cleaning the foam gun. Sprayer with water - for moistening the walls of the house. A spirit level. And gloves for clean hands. Since polyurethane adhesive foam hardens due to moisture, we moisten the place where the foam will be glued before work. Then we remove the applicator, which can be used to fill the gaps, and screw the gun. Shake 20 times. Glue is applied around the perimeter, 3-4 centimeters from the edge, and along a longitudinal line in the middle. In this way, we will achieve good thermal resistance, good tightness, because the glue has the same thermal resistance as polystyrene. Since the panels are 30 centimeters thick and milled, it will be difficult to fill the gaps, so I also spray foam at the joints. After waiting 2 minutes for the glue to harden a little, we can glue the panel. It is possible to adjust the plate for up to 5 minutes, therefore, in between, we check the flatness with a spirit level. After gluing the panel, we can see that there is almost no gap between the wall and the panel. After 2 hours, when the glue has completely hardened, we will check whether the glue does not push the panels away. After 2 hours, the panel is firmly glued. As we can see, the gap between the panel and the wall remained the same, unchanged. It is very important to tie the leaves in the corners. We can see one sheet completely, the other completely on the other side. What is relevant when warming windows and doors? Crossings of corner plates should be avoided so that the seam does not occur in this place. It would be necessary to cut out and make a triangular plate, this way we will avoid cracks in the plaster in the corners. As a result of three days' work, more than half of the house is insulated by two people, so working with Penosil glue is much easier and faster than with cement glue. Thus, the facade is insulated and ready for reinforcement work. Used product: https://penosil.com/lt/statybiniai-kl...