#ZENICOM #WEEKLYSERVICE #CARSERVICE #DUSTER1.5dCi #GLOWPLUG #HEATINGRELAY #DIAGNOSTICS #CHECKINGPLUGS You can buy glow plugs from us at the link https://zenicom.ru/product/%d1%81%d0%... Glow plug preheating relay https://zenicom.ru/product/%d1%80%d0%... Compare prices with our friends http://bit.ly/2HRzuFh Today, a patient on Renault Duster 1.5dCi with a problem - BAD START IN THE MORNING IN COLD WEATHER. Diagnostics showed - an error problem with glow plugs, that is, the ECU diagnosed a problem with the resistance of the glow plugs. In the video we will check: the ratio of what the engine control unit sees and in reality the intake air temperature, fuel temperature, coolant temperature, since this is also a problem with cold starting. We will show how to remove the intercooler pipes yourself, how to remove the engine cover, how to ring the glow plug resistance with a tester (multimeter), identify a faulty glow plug, how to properly change the glow plugs and what to lubricate them with so that they can be unscrewed easily in the future. We will also show how to change the glow plug preheating unit, how to remove the connector and dismantle it. Tightening torques: Engine cover bolts 25 Nm Glow plug 15 Nm Repair content: 0:00 IN THE VIDEO WILL BE 0:40 WHAT THE VIDEO IS ABOUT 0:51 PROBLEM DESCRIPTION 1:16 PRIMARY DIAGNOSTICS 1:47 CHECKING THE COOLANT TEMPERATURE SENSOR 2:03 CHECKING THE AIR AND FUEL TEMPERATURE SENSORS 2:45 WHY WE WILL CHECK THE GLOW PLUGS 4:08 BEFORE REMOVING THE GLOW PLUGS, REMOVE THE BATTERY TERMINAL 4:38 BE SURE TO BLOW OUT THE PLUG AREA WELL WITH COMPRESSED AIR 4:52 UNSCREW THE OIL FILLER BOLTS AND MOVE IT AWAY 5:10 UNSCREW THE 4 ENGINE COVER FASTENING BOLTS 5:49 REMOVE THE STOPPER FROM THE INTERCOOLER PIPE 6:19 CLOSE THE PIPE HOLE 6:33 REMOVE THE WIRING CLIPS FROM THE ENGINE COVER 6:49 UNSCREW THE ENGINE COVER LATCHES AND REMOVE IT 7:12 BLOW OUT THE GLOW PLUG AREA AND REMOVE THE GLOW PLUG CONNECTORS 7:57 CHECK THE RESISTANCE OF THE GLOW PLUGS 10:21 WHERE TO BUY GLOW PLUGS AND A HEATING RELAY 10:29 CHANGING THE GLOW PLUGS 14:07 ABOUT TIGHTENING TORQUES 14:39 WHY WE CHANGE THE GLOW PLUG HEATING RELAY 17:02 LOOKING AT THE RESULT OF THE WORK 17:38 FINAL POINT ----------------------------------------------------------------------------------------------------- Instagram - useful tips from repairs and spare parts every day: / remontrenault Become a part of the Renault Repair team: / @zenicom Important things for the channel: http://www.donationalerts.ru/r/petrth... ----------------------------------------------------------------------------------------------------- Today a patient on Renault Duster 1.5dCi with a problem - BAD START IN THE MORNING IN COLD WEATHER. Diagnostics showed that the error was a problem with the glow plugs, that is, the ECU diagnosed a problem with the resistance of the glow plugs. In the video, we will check: the ratio of what the engine control unit sees and in reality the intake air temperature, fuel temperature, coolant temperature, since this is also a cold start problem. We will show you how to remove the intercooler pipes yourself, how to remove the engine cover, how to ring the glow plug resistance with a tester (multimeter), identify a faulty glow plug, how to change the glow plugs correctly and how to lubricate them so that they can be unscrewed easily in the future.