185,568 views
Hello Friends. In this video, I tried to share the fault with you step by step and in detail by detecting the fault that occurred as a result of the explosion in the Power Led Power Supply. I would like to give a brief summary about the circuit elements I processed: I changed the blown fuse. I tested the durability of 2 high-frequency Schottky diodes together with the bridge diode and connected them to the circuit again. In addition, I changed the blown Mosfet transistor and BJT type PNP transistor. I tried to make the power supply usable by changing the 4 burnt resistors. (WARNING): I want to tell you about a subject that I neglected to mention in the video. I temporarily connected those two resistors and the fuse to the circuit so that they would do the job at that moment, at least to understand the fault. Since I had a lack of materials, I had to temporarily install these elements with low wattage. If I continue to use them like this, those resistors will not last due to excessive current. Later, I replaced them again after obtaining the same materials. I hope this was a useful video. Please support our channel. Regards, Love.. Diode types? 👉 • Bridge diode, Schottky diode, Normal d... What is an optocoupler? 👉 • What is an optocoupler, What is its working principle... My other media accounts👇 / koontrolkalemi / koontrolkalemi / koontrolkalemi / koontrolkalemi Background music used in the video belongs to 👇 The song Eternal Hope by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...). Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com/ #PowerSource #PowerSupply #MaintenanceandRepair