25,446 views
Developing the tool to remove a bushing is very easy, and with the bushing in hand it only took a few minutes to get the measurements and shapes of the 3 tools. Use 4 screws of 12 mm by 11 cm long, these screws have partial thread so you will need to buy about 10 washers to be used as shims to finish the job that will be done in two stages and don't forget to buy the nuts. 1 - Tool to remove and install the bushings External diameter 44.3 mm Height 23 mm Back wall 6 mm Side wall 3 mm 2 - Large cup for the opposite side: External diameter 53 mm Height 48 mm. Back wall 6 mm Side wall 3.4 mm 3 - Smaller piece opposite side External diameter 53 mm Height of 23 mm. Back wall 6 mm Side wall 3 mm 4 - Measurement of the hole in the center is 1/2. More videos on my channel: / paulodealmeida-babado