ORDER SILENT BLOCKS IN OUR STORE https://zenicom.ru/ Today in the video lecture we will show how to change the silent blocks of the rear beam on the Renault Logan2 patient without a single blow, because we remember that blows to the suspension are unacceptable during repairs!!! This replacement is similar to Renault Sandero2, Logan, Sandero, StepWay, StepWay2, Lada Largus, Almera G15 and other cars with an elastic rear beam. In the video we will tell you how to properly remove the rear spring, how to unscrew the bolts of the silent block of the rear shock absorber and beam, how to properly tighten the suspension after replacement, how to change the ABS sensor of the rear wheel, replace the rear suspension spring, what tool to use to perform this repair, etc. Tightening torques: Bolt of the lower shock absorber mount - Tightening torque 105 N m Rear wheel hub bearing nut - Tightening torque 175 N m Nut of the bolt securing the rear suspension arm to the body bracket - Tightening torque 125 N m Nut of the silent block of the rear beam 125 N m Bolts of the support bracket - 62 N m #VIDEO LECTURE #SILENT_BLOCKS_OF_THE_REAR_BEAM #ZENiCOM #REPAIRLOGAN #ZENICOM #VIDEO LECTURE #CAR SERVICE #CAR REPAIR #SILENTBLOCKS #REARBEAM Video content: 0:00 THE VIDEO WILL CONTAIN 0:36 WHAT THE VIDEO IS ABOUT 0:59 REMOVING THE WHEEL 1:29 FILLING THE SHOCK ABSORBER AND SILENTBLOCK BOLT 1:39 TEARING OFF THE SHOCK ABSORBER BOLT 1:54 TEARING OFF THE REAR BEAM S/B BOLT 2:04 HOW THE SILENTBLOCK TEARS 2:38 SUPPORTING THE BEAM AND REMOVING THE SHOCK ABSORBER BOLT 3:03 RELEASING THE HANDBRAKE CABLE AND SPEED SENSOR HARNESS 3:30 LIFTING THE BEAM A LITTLE 3:44 UNSCREWING THE THREE BRACKET BOLTS SILENT BLOCK 4:57 LOWERING THE BEAM AND REMOVING THE SPRING 5:33 REMOVING THE BOLT OF THE SILENT BLOCK BEAM AND THE BRACKET 5:42 ABOUT REMOVING THE SILENT BLOCK FROM THE BEAM 6:42 SAWING OUT A PART OF THE SILENT BLOCK FROM THE BEAM 9:12 REMOVING THE SILENT BLOCK BY HANDS 9:59 PREPARE THE SURFACE FOR INSTALLATION OF THE SILENT BLOCK 10:19 ABOUT THE TOOLS FOR INSTALLING THE SILENT BLOCK 12:25 INSTALLING THE SILENT BLOCK IN THE BEAM 14:09 PREPARE ADJACENT UNITS FOR ASSEMBLY 15:43 INSTALLING THE REAR SPRING 16:58 TIGHTEN THE BRACKET OF THE SILENT BLOCK TO THE BEAM 17:20 INSTALL THE WHEEL AND TIGHTEN THE BOLTS ON A STANDING CAR 19:00 FINAL ------------------------------------------------------------------------------------------------------ Instagram - useful tips from repairs and spare parts every day: / remontrenault Become a part of the Renault Repair team: / @zenicom Decoding the VIN code and equipment of your Renault: http://www.donationalerts.ru/r/petrth...