7,761 views
Electrical verification with PICO oscilloscope of a static double coil ignition. -Description of the video content. Simple explanation of the different types of double coil ignition that exist. -Explanation of how the electrical connection of the PICO oscilloscope to the double coil with integrated power stage in the mono coil assembly must be made. Location of each of the four terminals of the connection of the mono coil assembly. Measurement of the positive (+) supply voltage, voltage of the (-) ground terminal, voltage of the two square wave signals generated by the computer for the control of the primaries. -Analysis and interpretation of the oscillograms of the supply, ground and coil control voltages obtained with the engine running at idle. -Measurement of the primary current in the two coils. Analysis of the primary current oscillogram, verification of the magnetic saturation point of the coil and measurement of the maximum current value. - Measurement of the high secondary voltage at the output to cylinder number 1. Analysis of the measured voltages and the shape of the secondary signal in the oscillogram obtained with the engine running at idle. - Analysis of the primary current and secondary voltage oscillograms in cylinder number 1 with high rotation speeds. Explanation of the effect of the decrease in driving time when increasing the RPM. The tests were carried out with a PICO PQ178 oscilloscope, the product link is this https://www.miac.es/tienda-producto-v...