1,032,820 views
MATERIALS USED AND MEASUREMENTS (pallet wood): 4 pallet slats measuring 48 cm long x 6.5 cm wide x 1.5 cm thick (legs) 4 slats measuring 48 cm long x 5.0 cm wide x 1.5 cm thick (legs) 8 slats measuring 28.5 cm long x 6.0 cm wide x 1.5 cm thick (upper and lower inner sides) 5 slats measuring 30 cm long x 6.0 cm wide x 1.5 cm thick (stool seat) 60 headless nails, 3.5 cm long by 2 mm in diameter/thickness (to nail the inner sides from the inside out so that the nails do not show on the outside of the stool) 100 ml of wood glue (can be white PVA glue) -1 grit sandpaper 60 (glued to a piece of slat) to round/break the corners of the stool 1 120-grit sandpaper for the 2nd stage of sanding the piece after rounding the corners 1 120-grit sandpaper to sand the piece after applying the sealer 100 ml of wood sealer (I used this much well applied) 60 ml of ZU 10 varnish (resistant to friction and scratches after drying for 48 hours). You can apply any varnish you want. I used this one because I like the shine it leaves and because it is resistant and the shine lasts a long time.