1,511,545 views
Centrifugal clutch on a 25 mm shaft. You can get acquainted with the variator for belts in our online store Nado-Brat. In the Accessories section https://nado-brat.com.ua/centrobezhno... Call tel. (067) 450-39-39, tel. (099) 450-39-39 Overrunning clutch with a pulley for 2 belts profile B, can be installed on a 25 mm shaft. This product has a purpose that eliminates the movement of the pulley when the crankshaft is idling. After starting the unit, the blank called the pulley immediately began to turn the belts. The clutch device helped to get out of this situation. The principle of operation of the Variator, idle under the tension of the belts, the clutch with the pulley remains stationary, but when the operator adds gas, the mechanism that drives the pulley is triggered • Automatic clutch on the shaft ... Perhaps you may be interested in a clutch with a pulley on a 19 mm shaft, or 20 mm. You can buy such an automatic clutch on our website. In a short video review, we will demonstrate to you the operation of the clutch • Centrifugal clutch on a 20 mm shaft We also want to offer you to get acquainted with the centrifugal clutch under the sprocket. Sprockets of 10, 12, 13, 15, 17 teeth with different fit on the shaft and for a certain chain are available. In this review, we will show you the clutch 12T # 428 with a fit on the shaft of 20 mm. • Centrifugal clutch sprocket (12 ... Our range includes clutches with a pulley diameter of 100 mm and more. There are clutches with a reinforced mechanism, adapted to significant loads when working as part of a mini tractor, wood splitter and other power equipment • Centrifugal clutch on a shaft 2 ... Clutch for a vibratory plate • Clutch on a vibratory plate (shaft 20 ... If you intend to purchase an engine with an automatic clutch, we recommend you watch a video with such an engine • 16 hp engine with gas equipmen ...