Cleaning the throttle body of the car using a spray is a fatal mistake that everyone falls into and you must know it to avoid it ---------------------- Useful links for you to join the channel and get special privileges from here / @sasamh --------------------- - A cheap trick that doubles the life of your car battery Check it out from here • A cheap trick that doubles the life of your car battery and... ---------------------- To communicate regarding business, use the following email For business inquiries contact me at [email protected] Important note: I do not have a maintenance center and I do not repair cars for people ------ An Egyptian page that has cheap and useful products for cars / caregytech My second channel with quick maintenance videos / @mustafa-experiences On TikTok you will find short videos of maintenance work in the car https://www.tiktok.com/@mustafa_sasam... We share on Instagram pictures and short videos of what happens behind the camera / mustafa_sasamh A site that provides products related to cars and technology at discounted prices https://ban.ggood.vip/XsKP ------ Additional explanation about the video: - If this is your first time cleaning the gate, I advise you to take pictures of the gate with your mobile phone from all angles before disassembling to know where to connect each electrical plug, hose, or any opening to help you when reassembling - Disconnect the negative battery cable before disassembling - If you disassemble the gate for the first time, you must be very careful when lifting it from its place because there is a gasket between the gate and the manifold that often tears when the gate is removed quickly or violently. However, if you lift the gate and find it stuck to the manifold, leave it as is. However, if it is stuck to the gate, work on releasing it very gently - If the gasket is torn, it must be replaced because its composition while torn will make the engine sound loud - Wait for the traces of gasoline from the gate to dry completely before installing - If you decide to clean the manifold, do not use anything but a clean cotton cloth and do not use any liquids of any kind - When installing and operating, it is recommended to make an idle learn Before starting the engine, keep in mind that the engine starts the first time and its sound is a little loud and then calms down within 30 seconds. If the engine sound continues to be loud, this means that the gate is drawing more air than necessary as a result of installing the gasket, which is torn or installed in reverse. - This explanation will be very useful to you if your air gate is similar to the one in the video and works manually with a wire and not electric. The correct and effective way to clean the gates... - If your engine gate works with electricity and not wire, before cleaning, first look for a place that provides programming services for the gate after cleaning it because you will need this after completing the cleaning. - If your car gate works with electricity, you can clean it after removing it from its place and moving it a little away from the manifold, but without freeing all the electrical connections from it or pressing the tongue inside. In this case, use the spray to clean it due to the narrow space. The explanation is over. Don't forget that watching the ads on the video is support for me to continue. You can get benefits and support the channel by subscribing to it from here / @sasamh #cleaning_the_gate #cleaning_the_throttle_body #cleaning_the_air_gate