15,567 views
This time, the vaunted German quality failed and one of the burners of the SIEMENS EP616PB11E panel (purchased in 2013) stopped burning. So, a little about the part: Thermocouple article 416742 for gas oven Bosch/Siemens/Neff. Bought here: https://rem-ko.ru/products/termopara-... I should say separately about the seller: the price is adequate, similar ones from others are sold for about 3 thousand rubles. Sent quickly. He contacted me himself, clarified everything and worked quickly, the assortment is large, but it is located in Voronezh. Delivery to the Moscow region by CDEK took only 4 days and cost me an additional 350 rubles. Replacing the thermocouple itself is not a hassle, it takes a maximum of five minutes, but if you put your panel on silicone (as I did) - I wish you good luck and strength, because, well, it took a very long time to cut it off, carefully clean the surface of the countertop so as not to scratch it, and I washed the hob itself for a long time (oh, and there was some shit there, friends). In general, I changed everything, assembled it, everything works properly (thank God!). Special attention to the gaskets of the burners, most likely they are fucked and something needs to be invented, since the price tag on them is inadequately "horse". Also, pay attention to the bolts that fasten the burners to the panel, although they are made of stainless steel, they stick badly, become covered with carbon deposits, and therefore are difficult to unscrew (but they are unscrewed), however, not all of them and some had to be replaced. I will be glad if my video helps you in repairing your equipment, but it is not a guide to action. Everything you do, you do at your own risk and this is your independent decision. I do not recommend getting into gas equipment if you are not confident in your abilities. After repair, I strongly recommend checking the connections that were opened during the repair with a soap solution to avoid leaks. GAS is dangerous, so I ask you to BE CAREFUL AND CAREFUL, FRIENDS! It is better to contact a specialized gas equipment repair service (it is a pity that there are none in my city). Please thank my work with your "like". If you are interested in my videos, subscribe to the channel, I will be glad! Good luck with the repair! Ask questions in the comments, I will try to answer.