525,965 views
Subscribe: http://bit.ly/2odNMVe Facebook: / domza150tysiecy Forum: http://forum.domza150tysiecy.pl/ Here you can buy a house design for 150 thousand: http://bit.ly/2oh5NS1 Hello. Today we started bricklaying partition walls from aerated concrete. Yesterday, i.e. Thursday, we prepared the first layer on cement mortar. The jamb at the door is anchored on each layer in the manner shown in the film. It is important that the rod anchored in the load-bearing wall is rigid, i.e. embedded in the glue, only then does this process make sense. If the rod is not rigidly seated in the wall, the connection will not be correct. This method was used, is used and most likely will be used, because it is proven. There are of course other different methods using dedicated / system connections, but they are not very popular in our country yet. They are not available immediately in the local wholesaler or even Castorama. While bricklaying the walls, I wanted to present these solutions, but unfortunately, due to the lack of possibility to buy them, it probably won't be available anytime soon. It was supposed to be presented more as a curiosity, because I don't think it will catch on and become a standard in our country.