1,235 views
Chucker for everyone ???? #mechanical #pride comrades, I will tell you the most important points. Take care 1- When you put the shell on, when you finish the work, be sure to grease the washers of Abendi so that it doesn't come off. Finally, when you put all the gears, check all the gears and see if there is any problem. 4- The holes of the oil funnel must be facing the oil channel when putting it, because the function of the funnel is to spread the oil. 5- Try to check the bearings one by one. See that they are not corroded, in addition to the sound. Chucker all Brara ???????? content or timestamp 00:00 Gearbox assembly 00:01 Removing the bearing with a pulley 02:34 Changing the gears 06:34 Inserting the gear lever felt bowl 09:26 Installing the important lever base 10:49 Installing the housing 10:58 Installing the oil funnel is very important ???? 11:22 Installing the inner shaft felt bowl 12:51 Khar Mahek, be careful 13:46 Putting on the reverse gear 15:48 Putting on the reverse gear 17:11 Closing the gear divider 18:03 Samavari health test 20:19 Washara Abandi 22:54 Jazden Sacheme 1.2 23:17 Jazden Sacheme 3.4 23:39 Felt bowl 24:53Close the clutch bearing