19,885 views
video sponsored by https://www.pcbway.es/?from=editronik... https://www.pcbway.com/activity/chris... up to 70% off, Cash Coupons, Giveaways, etc. waiting to be claimed, to celebrate Christmas and Thanksgiving. today we will watch a step by step video on how to make a mini tesla coil and NOT FAIL IN THE ATTEMPT, I have looked at this project in many places but this project many times does not work on the first try, so I took the time to explain many details of how it works, tips to keep in mind and how to verify it on the oscilloscope. -------- - materials - ------------ utp cable 20cm enameled wire gauge #26 to 32 any value, 10 meters wire to turn on the led gauge #20 6 meters an NPN TIP41C or 31C power transistor -a 22k resistor a plastic or wooden tube or core 2.54 cm by 10 cm long -2 normal 5mm red leds preferably for the voltage they work with jumper cables masking tape or paper tape -a piece of sandpaper a plastic or styrofoam ball about 5cm in diameter is not critical a piece of aluminum foil 20cmx20cm -liquid or bar silicone ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦ SUBSCRIBE TO MY CHANNEL EDITRONIKX AND ACTIVATE THE BELL ✅ / @editronikx ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦ Follow me on all social networks. *********** follow me on social networks ********************** web: http://www.editronikx.com.co telegram:. https://t.me/editronikx instagram: /editronikx facebook page: /editronikx.edison facebook group: /editronikx twitter: /editronikx ************* donations ********************** http://www.editronikx.com.co/p/donaci... ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦ Free course ♦♦♦♦♦♦♦♦♦♦♦♦ pic course • PIC microcontrollers course with ccs electronics course from scratch FREE https://goo.gl/35xCGZ #editronikx #miniteslacoil