561,496 views
Installing a submersible pump in a well with your own hands. Before installing the pump, you need to prepare everything and assemble it into a single structure. A check valve is screwed onto the pump through an adapter (nipple). Next, a pipe is attached to the pump, in my case it is a HDPE pipe with a diameter of 32 mm at 10 bar. The cable feeding the pump is attached to the pipe with electrical tape. A safety cable is also attached to the pump, in my case it is a galvanized steel cable with a diameter of 4 mm. The pump will be attached to the well using a sealed head through which the pipe and cable pass, and the cable is also attached.