Installing a sliding glass door - on a wall opening with or without a frame [instructions] BAUHAUS Workshop - BAUHAUS - World Latest Movie, Series, Videos and Trailers

Installing a sliding glass door - on a wall opening with or without a frame [instructions] BAUHAUS Workshop

53,558 views

Published on Sep 25, 2023

About :

Installing a sliding glass door is not difficult and can be done in half a day. However, you should definitely find someone to help you. The door is heavy - it should only be moved by two people. First, you must decide whether the sliding glass door is to be installed on a wall opening where the existing frame is to remain in place. In this case, an additional spacer profile is required to increase the distance between the wall and the guide rail so that the sliding door slides past the frame. If there is no frame or if it is to be dismantled before installing the sliding glass door, no spacer profile is required and the sliding door runs closer to the wall. Then it starts: unpack and sort the material, clean the glass surfaces and the carriage can be carefully attached to the glass door - ideally using a torque wrench. Then the height of the first drill hole for the support rail is determined by looking at the assembly instructions. Drill, dowel, screw - then the support rail can be aligned with the spirit level and the remaining drill holes can be made. If the support rail is hanging securely on the wall, the guide rail can be attached to it. Or the spacer profile and guide rail if the frame is retained. Now slide the runners and end stops into the rail and tighten slightly - and the door is hung. Align the runners and stops, don't forget the floor guide, attach the covers and... glue the handles on so that the glass sliding door survives its first opening without a whole handful of fingerprints. Our BAUHAUS workshop moderators Julia and Liam will explain to you what this all looks like in practice and what you need to look out for. Chapter: 00:00 - Intro 00:21 - Option 1: Installation on wall opening with frame 00:27 - Remove old door and hinges 02:05 - Clean glass door and attach carriage 03:59 - Mark first drill hole on wall 05:05 - Drill holes for track 06:01 - Install track with spacer profile 07:44 - Hang door and adjust 11:03 - Attach floor guide 12:43 - Attach track cover 13:23 - Attach door fittings 14:37 - Option 2: Installation on wall opening without frame 🛒 Material: • We installed this glass sliding door in the video: https://www.bauhaus.info/glasschiebet... • There are even more glass sliding doors here: https://www.bauhaus.info/glasschiebet... • Glass sliding door fitting Linea 40 https://www.bauhaus.info/p/26979063 • Linea 40 spacing set https://www.bauhaus.info/p/27464605 🔨 Tools: • Pin wrench set https://www.bauhaus.info/c/10000101 • Torque wrench https://www.bauhaus.info/p/26274218 • Folding rule https://www.bauhaus.info/c/10002366 • Tape measure https://www.bauhaus.info/c/10000132 • Spirit level https://www.bauhaus.info/c/10000130 • Cordless impact drill https://www.bauhaus.info/c/10000163 • Masonry drill https://www.bauhaus.info/c/10002872 • Open-end wrench set https://www.bauhaus.info/c/10000099

vidoe Comments

Trend Videos