1,178,929 views
In this video I will show how I did the arrangement of a well for water and the introduction of a water supply into the house from the well. A well was dug for the well for reinforced concrete rings with an internal diameter of 1500 mm (2 pcs). The rings were mounted directly from the car. A floor slab was laid on the rings, and a small ring (neck) was placed on it. A green polymer-sand hatch was installed on top. The hatch was fastened with anchor bolts, having first been installed on a cement-sand mortar. The water supply to the house was carried out with a HDPE pipe with a diameter of 32 mm. The pipe was insulated with a pipe insulation made of foamed polyethylene. In the same trench, I laid a cable for connecting a VVG ng 3x2.5 pump in a HDPE pipe with a diameter of 20 mm. In addition, I made a pipe outlet from the well for watering the garden. I insulated the top of the floor slab with 10 mm EPS, as well as a small ring, this will reduce the freezing of the well.