Install the sealing rings on the injectors correctly. The upper and lower ones wear out differently.

150,582 views

Published on Feb 27, 2021

About :

How to choose a scanner 👉 https://moylacetti.com/adapter-dlya-d... Shop https://zaz-shop.com.ua/ ⭐ 100% Large selection of spare parts for Daewoo LANOS, SENS, MATIZ, NEXIA, Gentra ⭐ Chevrolet Lacetti, Aveo, Epica, Cruz, Takuma ⭐ ZAZ FORZA, Vida ⭐ Delivery across Ukraine tel. 097-990-07-47 Hello, Friends🖐 Today is a simple but very important video. I often encounter air leaks through the injector seals. Moreover, this leak is often provoked by the car owner himself. He removes the injectors for repair, replacement, cleaning, etc., but when installing them back, he does not change the injector seals, citing that they are intact and not cracked and therefore will still serve. And at the same time, he does not ensure that they are installed correctly - those that were on top must be installed there too. But few people follow this, because initially, when the rings are new, they are the same size. Therefore, there is no difference between the top and the bottom. But over time, the ring decreases in size and becomes much smaller than the bottom one. And therefore, when installing it down, we will get a guaranteed suction. It follows from this that when installing used seals, it is necessary to strictly observe the installation location. And it is even better to change the seals to new ones each time the injectors are dismantled, and not look at their appearance. After all, the absence of cracks does not mean anything. Replacing filters and injector seals. How to easily check injectors👉 • Replacing filters and injector seals... Flushing injectors, valves and combustion chambers👉 • Flushing injectors without removing, valves... If you find the video useful, please like it😉 Peace and smooth roads to everyone🤝 🤝Treat the author to a cup of coffee👉 https://sobe.ru/na/moylacetti ⚡Or become a channel sponsor, and you will get access to exclusive bonuses. More details: / @moylacetti ✅Our website: https://moylacetti.com/ ✅Our forum: https://moylacetti.com/forums/forum/f... ✅Our telegram: https://t.me/moylacetti 📌DIY computer diagnostics 👉https://moylacetti.com/category/diagn... 📌Download the Chevrolet Explorer program👉 https://moylacetti.com/chevrolet-expl... 📌How to choose a scanner 👉 https://moylacetti.com/adapter-dlya-d... 📌Configuring the Chevrolet Explorer program👉 • Auto diagnostics. Concepts and settings ... ⭐Contact the author👉 https://moylacetti.com/obratnaya-svyaz/ ✅Link to the Throttle Valve Assembly👉 http://alii.pub/681a0p ✅Link to the IAC Motor in the Throttle Assembly👉 http://alii.pub/5s2wgu ✅VAG 409.1 Diagnostic Adapter with Switch👉 http://ali.pub/4f90ml ✅ELM 327 (can reset adaptations) 👉http://ali.pub/5c0lk6 ✅Link to Galletto 1260 (for firmware) on an FTDI chip 👉http://alii.pub/5vs08r ⚡Subscribe to the Yandex.Zen channel👉 https://zen.yandex.ru/moylacetti

vidoe Comments

Trend Videos