197,355 views
Making a fence from corrugated board in Krasnodar https://t.me/Hitryj_Sasha ---------- I made a GORGEOUS fence from corrugated board with my own hands for my subscriber. The video shows an ACCELERATED PROCESS, I focused only on the MOST IMPORTANT THING!!! SUBSCRIBE / @sasha-hitryj Yandex Zen https://zen.yandex.ru/profile/editor/... A video without chatter, I have already told and shown everything in my videos, so there is nothing new to add yet. A fence made of a profile pipe, corrugated board under a tree with a wicket and sliding gates with your own hands. The following materials were used when installing a fence from corrugated board: Pillars (profile pipe) - 80 * 80 * 3 mm; Frame made of profile pipe 40 * 20 * 2 and 20 * 20 * 2 mm; The wicket frame is made of a 40*40*2 mm profile pipe; The gate frame is made of a 60*40*2 mm profile pipe; The lower rollers are made of nylon; The upper rollers are made of silicone; The door seal is a narrow-profile mortise lock; The notch is 215 mm high; The Antique oak profile sheet is 0.5 mm; The reinforcement is 10 mm; The clamps are 6 mm; The concrete is M250. The facade fence made of corrugated board with a wicket and a gate is 20 meters long. The manufacturing period is 14 days (including 2 days of rain, 1 day of no power, 1 day of trouble with concrete). The cost of work on this fence made of corrugated board with a slab for entry is 74,000 rubles. If I missed anything, ask in the comments. Thank you all for watching and subscribe to the channel! For commercial offers - [email protected]