104,386 views
Since it is not possible to use arc sources when welding at home, I am trying to show how torch and yellow-silver welding, which you can use in small welding processes. Normally, 1 oxygen cylinder, 1 acetylene cylinder and a mixture called torch, which makes the mixture of these, are required to make yellow or silver welding. Two gases are used to obtain the most suitable high temperature in this mixture and it is necessary to have some experience to apply. When the suitable high temperature is obtained in the mixture, the welding wire is heated a little and this heated wire is dipped in a special white powder called borax powder, which resembles powder detergent in appearance, and is melted and applied to the area to be welded. Or, as we used in our video, self-boraxed wire rods can be preferred. This oxygen and acetylene gas is a job that requires mastery during application and causes dangers in unconscious hands. When you cannot keep the ratio, you can burn yourself due to explosions or high heat. Therefore, if you are not experienced, you should not attempt this job at all. However, you can do your small welding jobs with less risk with a blowtorch and yellow or silver welding wire. I am also sharing a few links below for those who do this type of work. I highly recommend you to take a look. Professional rosary lathe https://goo.gl/3ZnBnM Mini lathe: https://goo.gl/oaqq37 Guide and die set https://goo.gl/hfXqfy A nice screwdriver set (highly recommended) xiaomi cordless https://goo.gl/Fim52G 100 various drill bits: https://goo.gl/utzSkN Sandpaper: https://goo.gl/JF3amn White glue: https://goo.gl/ooiDPE Mini file set https://goo.gl/G1fHGg The song Easy Jam by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...). Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com/