6,276 views
MATERIALS USED BRC FILTER SET *LPG FILTER *LPG CUTTER FILTER *GAS FILLING CAP *ORINGS EQUIPMENT USED *PLIERS (TO REMOVE CLAMPS AND CLOSE CYLINDER VALVE) *RING PLIERS (TO REMOVE LPG FILTER RING) *CROW NOSE PLIERS (TO REMOVE FILTER INSIDE) *17 KEY (TO REMOVE GAS CUTTER FILTER BOTTOM) *14 KEY (TO REMOVE GAS CUTTER PIPES) *10 SOCKET SCREWDRIVER (TO REMOVE ENGINE PROTECTION COVER AND CUTTER FIXING SCREW) OPERATION ORDER 1- START THE VEHICLE WAIT FOR LPG TO PASS 2- CLOSE THE VALVE ON THE CYLINDER WHILE WORKING ON LPG 3- WAIT FOR THE VEHICLE TO STOP, TURN OFF THE IGNITION AFTER STOPPING 4- CHANGE THE GAS FILTER AND CUTTER FILTER 5- OPEN THE VALVE OF THE LPG CYLINDER 6- START THE CAR AND WAIT FOR LPG TO PASS ATTENTION!!!!!!! MAKE SURE TO TIGHTEN THE PARTS WELL WHEN DOING THESE PROCEDURES!! IN CASE OF A GAS LEAK IN YOUR VEHICLE, YOU CAN CLOSE THE VALVE OF YOUR VEHICLE AGAIN, USE IT IN GASOLINE, AND GO TO A LPG SERVICE TO HAVE A GAS LEAK CHECK DONE. THANKS FOR WATCHING. PLEASE COUNT AND WRITE IN THE COMMENTS HOW MANY TIMES I SAID "AS YOU SEE" :)