379,861 views
Reading the color band of the resistor or resistance (Resistor, R) can be read according to the following steps: 1. Remember the value of each color as follows: Black = 0 Brown = 1 Red = 2 Orange = 3 Yellow = 4 Green = 5 Blue, navy blue = 6 Purple = 7 Gray = 8 White = 9 Gold = 5% Silver = 10% 2. 4-band resistance, the first two bands are the base. 3. The third band is the multiplier, for example, red is the third color, the value is 2, meaning the multiplier 10 to the power of 2 = 100. 4. The fourth band is the error percentage, mostly gold and silver. 5. The five-band R has the same principle: the first three are the base, the fourth is the multiplier, and the fifth color is the error percentage. For example, there is R1 with the following colors: brown-black-brown-gold. Reading the color band of the resistor Or resistance (Resistor, R) Can read Follow the steps as follows 1. Remember each color as follows Black = 0 Sugar = 1 Red = 2 Orange = 3 Yellow = 4 Green = 5 Blue, Blue = 6 Purple = 7 Gray = 8 White = 9 Gold = 5% Money = 10% 2. Resistance to 4 color bands The first two color bands are set. 3. The third color bar is the multiplier, for example Red is the color 3, the value is 2 means the factor of 10 raised to the power of 2 = 100 4. The 4th color band is Wrong percentage Mostly gold and silver 5.R The fifth color bands have the same principle which is The first 3 characters are numbers. The fourth is the multiplier. The fifth color is a wrong percentage. Example has R1 in this color Brown-Black-Brown-Gold Read as follows Brown = 1, Black = 0, the numerator is 10 The third color of sugar is the factor multiplier. = 1 Is 10 to the 1st power = 10 Therefore 10x10 = 100 Oh 5% error This R value must be between 95-105 Ohm.