57,879 views
8-903-743-27-96 8-903-724-77-28 n-dom.ru ceresit.msk.ru terraco.pro Training video on the SFTK Wet Facade technology, Ceresit system. At the construction site, I teach the customer's workers how to properly perform work on the installation of the base reinforcing layer. In the mineral wool slab, we made a slope for installing a window sill. Then we made a primer layer with Ceresit CT190 glue, the task is to press the glue for SFTK into the structure of the mineral wool, glue the upper fibers with glue. We prime the planes and slopes. It is necessary to wait until the primer layer dries and a crust of glue appears on the surface of the mineral wool. If inhomogeneities and stains appear, then these places in the mineral wool need to be cut out and replaced with new wool. After that, we install diagonal and internal gussets, we embed strips of Bautex Krepix 2000 5x5 mm, 165 g/m2 Facade Glass Fabric Mesh into Ceresit CT190 glue. The gussets are embedded into Ceresit CT190 glue, the glue is applied and then the mesh strip is embedded. Diagonal gussets are placed on the main plane at the corners of window openings measuring 300x500 mm, the orientation of the fibers with an inclination of 45 degrees. Internal gussets are installed in the internal corners of window openings, in all four corners, the length is not less than 300 mm, the width of the internal gusset is 5-10 mm narrower than the width of the slope. Next, we apply Ceresit CT190 glue to the slopes and first embed the mesh from the abutment element with the mesh into it, and then the corners with the mesh. At the corner with the mesh, the wide strip of the mesh is placed on the plane of the facade, and the narrow one on the window slope. On top of the joint, we put a strip of Bautex Krepix 2000 Facade Glass Fabric Mesh 165 g / m2, cell 5x5 mm. The strip is also embedded in the glue, the width of the strip is 5-15 mm narrower than the distance from the plastic of the abutment element to the plastic of the corner with the mesh.