516 views
In this video, we will show you how to properly install Mardom Dcor skirting boards. These skirting boards are the last, but definitely the most important part of proper floor installation. Thanks to them, the interior of our house will not only look nice, but the floor will also gain additional protection from moisture and dirt. And that is why proper installation of skirting boards is so important. The first and definitely the easiest option is to install the skirting boards by gluing them directly to the wall. This method is very fast, but it is good to know a few things before installing the skirting boards. First of all, applying the glue - we recommend applying the glue along the entire length of the profile in a wavy motion. This will ensure that the skirting board adheres well to the wall and does not come off over time. The screw method requires drilling special holes in the wall, where dowels and screws are inserted, which are used to attach the skirting boards to the surface. We should drill holes along the entire length at intervals of approximately 40-50 cm. It is necessary to pay special attention to the distance between the holes in the strips to perfectly match the distances on the wall. Then simply place the strips on the surface, insert the dowels into the holes and screw the elements to the dowels with screws. This method is suitable for wooden strips, but it can also be used for installing special PVC and MDF strips.