63,287 views
Guys, hello everyone, I've long wanted to record a video like this for you, simple and understandable, without abstruse words and other professional terms. I've long wanted to make normal wiring in the garage, since there was only one outlet, there was no light, I had to switch it all the time and other problems, but I decided to solve this problem once and for all. Moreover, most of the components were there. And so we'll need: 1. 40A machine gun 2. 2 pcs. of 20A machines 1 machine for 16A and 10A and also 1 socket for 16A busbar for 8 groups of contacts boxes for 8 machines copper busbar one-pole multi-core wire 6 mm² or use single-core copper wire I also used 6 mm² NShVI tips crimper for sleeves http://alii.pub/61fjxi wire stripper. http://alii.pub/61fkcv http://alii.pub/61fke8 and a screwdriver all this can be bought in Leroy Merlin or ABC or other stores, but it is better to buy from trusted stores or official dealers. This is my choice, I am not saying that you need to select these components, but it is better to listen to how to fasten the conductors. and here is a new version of the new shield here is a link to the video • I am assembling an electrical shield for the master... for I began to actively throw into it material that will only be on the channel, a lot of photos and videos. as well as a group in VK https://vk.com/club137414609 and in the channel on Zen https://zen.yandex.ru/id/608132871d12... you can also help the channel financially so that the projects are cooler and better.