46,729 views
WHAT? You can use 4 nails with a diameter of 3 mm, a metal clothes hanger or anything with the specified diameter as a radio remover. I don’t see any point in buying special pullers just to remove the standard radio from a Ford Focus 1 once in my life, especially since I don’t professionally remove radios on a daily basis. I was lucky to find one electrode near a construction site. HOW? After bending the electrode into a bracket so that each half has the same length, you need to insert the bracket into the technological holes and push it all the way in. Move the bracket aside and pull it towards you. Remove the bracket and, holding the freed side of the radio with your hand, remove the second side with the same bracket (this is if you have one bracket, not two). WHAT TO REPLACE WITH? I installed an adapter frame and a modern radio instead of the standard one. The adapter frame is needed to hide the hole formed due to the difference in height between the standard and the new radio. Also, you need adapters - wires to connect the radio with the standard wires in the car. The adapter frame and wires can be found on the Internet by googling "ford focus 1 adapter frame" and "ISO Ford adapter". Always read the product descriptions so that your car model is indicated as suitable. GOOD BETWEEN ALL!