61,880 views
Fiesta Zetec Rocam Second stage of the fan tripped and would no longer turn off. We went to check the radiator hoses and the upper hose was very hot, the lower one was cold. The complete thermostatic valve kit that was in the car was from Iguaçu. This thermostatic valve had about 5,000 km on it, a valve that is still considered new. When this problem occurred, we purchased a new thermostatic valve with the complete kit as well. Easel, thermostatic valve and temperature sensor all from the WAHLER brand, original manufacturer of parts for Ford. The difference was huge compared to Iguaçu. We also had a surprise when dismantling the old thermostatic valve, I showed everything on video. We carried out tests and comparisons between the two brands, Iguaçu and Wahler. We also did the test on the highway, where the effectiveness of the WAHLER brand valve was proven 🔘 VIP GROUP ON TELEGRAM: https://botgram.club/fiesta-dicas-aut... *NOTE: Group became VIP to better filter the new members who are joining and help bring new content to the Channel and better support in the group. One-time, lifetime fee! 🟡 Precinho Parts for Fiesta Rocam - https://shope.ee/5V0f0nuKCu 🛑 How to Loosen and Place Pressure Clamp easily: • How to Loosen and Place Pressure Clamp... 🛑 Change Additive and Remove Air from the Cooling System of the Fiesta: • Change Additive and Remove Air from the System... 🛑 How to Know the Digital Temperature Using the Ford Secret Menu: • How to Know the Temperature Without Assistance... 🛑 Temperature Dropping to 80 Degrees on the Highway: • How to Know if the Valve Thermostatic... #Ford #Dica #fiesta #fordfiesta #fiestadicasautomotivas #carros #mecanica #rocam #dicas #facaemcasa #mecânico #carros #dicasdecarro #dicadecarro #diy #dicademecanico #dicasautomotivas #dicasautomotiva #mecanicaautomotiva #dicadeoficina #autodicas #oficinamecanica #wahler #iguaçu #temperature #thermostatic