100,543 views
Presentation, assembly and flow test for the DDT 4SKM-150 clean water submersible pump. It is a deep submersible pump, recommended for supplying water for domestic, civil, gardening or irrigation purposes. It is suitable for pumping clean water from a well or well with a diameter greater than 100 mm. The 4SKM-150 submersible pump has an oil bath motor with brass rotor, copper winding and two bronze turbines. The manufacturer mentions that it can be used to push water from wells up to 120 m deep with a maximum flow rate of 5 m³/h at the pump level. From the tests carried out by me at a depth of 10 m (8 m + 2 m below the water level) a flow rate of 2.4 m³/h resulted. The pump can be purchased from: https://l.profitshare.ro/l/8953407 Technical characteristics: Motor power 2200 W Maximum speed (rpm) 2850 Supply voltage 220 V Insulation class IP 58 Protection class ICL B Maximum temperature 35 C Discharge connection diameter 1 inch Suction connection diameter 1 inch Maximum flow rate 5 m³/h Discharge height 120 m Dimensions: Height 54 cm Diameter 100 mm Cable length 10 m Weight 12 kg Latest videos: / @taran.de.weekend Disclaimer: Some links are affiliate links - through them I earn a small commission if you buy something (at no additional cost to you). #pump #submersible #DDT