13,799 views
Everything you need to know about motor pumps! Let's watch the video! What is the purpose of your pool's motor pump? It draws water, sends it to the filtration system and returns it filtered to your pool. It can be used for your whirlpool system and your infinity pool. The motor pump has a system that filters the water, preventing debris from reaching the motor and damaging it. It is recommended for infinity pools. The whirlpool pump, on the other hand, collects water from the bottom of the motor and then returns it for use, so you can only use the motor. To install your motor pump, it must be installed in a dry environment with air circulation. It must be 20 cm from the wall, otherwise it will overheat and turn off to prevent the plastic parts inside it from melting. Depending on the size of the pump, as shown in the video, it can be installed above the water level or not. If installed correctly, it will last 10 to 15 years. To make the right choice, it is important to always check your engine room first. There is no point in choosing the engine or pump and then checking it. In the video, we will show you an option for you who have some problems with your engine room, which may have a solution to your problems. Did you like the video? Keep an eye out for the next content and don't forget to leave your like.