143,194 views
🌐 My website ➡️ - https://clck.ru/3A4gdS 💰 Estimate for replacing radiators - https://clck.ru/3A4gjm ⚠️ Correct replacement of heating radiators - https://clck.ru/3A4hFc 🛠 Telegram channel - https://t.me/tehkomfort 🧮 What to buy to replace a heating radiator? - https://clck.ru/3A4hPQ ❓ How to turn off the heating riser - https://clck.ru/3A4hYQ 📊 Rating of bimetallic radiators - https://clck.ru/3A4hbi 📕 Memo to the customer - https://clck.ru/3A4het 🔄 Installation of heating radiators. Connection diagrams - https://clck.ru/3A4hiN ⏸ Replacing heating radiators on a two-pipe system - https://clck.ru/3A4hrP ✅ Which pipes are better to connect a heating radiator in an apartment - https://clck.ru/3A4hvk Watch the video and you will learn how to properly install such a heating device as a bimetallic radiator in an apartment of a multi-storey panel house with a lower supply of coolant along the riser. Please forgive some reservations in the video, it is not so easy to carry out the installation and at the same time maintain literate speech, doing the work on time, since the replacement of radiators was carried out during the heating season, in early March 2020. Special thanks to the site foreman of DEZ Yasenevo, Moscow, for understanding work issues. The video was recorded at one of our sites in Yasenevo, Moscow, where we needed to replace 5 heating radiators using steel pipes and gas welding. The choice of all materials is based on my personal experience of installation for 12 years, so I can safely recommend Rifar Monolit as the most reliable and technically successful bimetallic radiators on the Russian market. Their advantages: - monolithic design with a welded manifold without contact of aluminum with the coolant - input diameter of 3/4 ", eliminating the need to install a transition sleeve on the gasket - wide vertical manifolds, do not get clogged with scale - wide mounting places for brackets, the radiator does not create noise during temperature expansion on the riser. The house has a lower supply of coolant, therefore, according to the diagram from the manufacturer, it was necessary to install a non-standard side connection of the radiator, but one in which the cooled coolant would come out of the lower manifold, taking into account the location of the riser in the wall, we chose the lower connection.