3,039 views
How to replace the water cooler filter First of all, remove the cooler body. Check the body, filter, and drain pan to make sure they are intact, and if any of them are damaged, there is a spare part that you should purchase from the market according to the size of the cooler. If all the parts are intact, there is no need to open them, just wash them and put them back in place (you can use high-pressure water or even a carpet abacus when washing). If the filter is damaged or sagging, open the fences on the filter (it is possible that the fences are different in all coolers) and wash them or replace them with new ones, and replace the filter and the fences with the same model that you opened, and put the body back on the cooler, and that's it. And if the drip tray is damaged, basically open it, it has two screws and prepare a sample and replace it. The only important thing about the tray is that it can be adjusted for proper drip on all parts of the straw, which is very important so that all parts of the straw get wet. You can adjust this issue while you tighten the two screws. I hope this tutorial is useful for you. Don't forget to like and subscribe. Thank you. Installation work training with Majid Mahmoudi@injatasisat Water coolers usually include a paper or cellulose cover in which water flows and is directed to the top of the cooler by a pump. When hot and dry air passes through the cooler cover, the water evaporates and heat is absorbed from the air, which leads to cooling the air. Replacing the water cooler straw is used as a spare part and required for the cooler due to damage or inefficiency. The new filter must be compatible with the size and model of your air conditioner and must be installed carefully, following the instructions for replacing the air conditioner filter.