672 views
Recommended mesh SP16 + 30 meters of line https://allegro.pl/oferta/siatka-stud... 1. Preparing the mesh ✔ ???? Cut the mesh in half to get two pieces measuring 55x50 cm. 2. Drilling the pipe ✔ ???? Make 4 rows of 24 mm diameter holes, evenly spaced every few centimeters. ???? Leave a 30 cm section at the end of the pipe without holes. 3. Preparing the line ✔ ???? If you have 30 m of line, cut it into two sections. One section should be 16 m long and the other 14 m long, with the recommendation to use the shorter section first. 4. Wrapping the pipe with a shorter line ✔ ???? Wrap the pipe with a shorter section of line (14 m), pulling it tightly while wrapping. ???? Secure the beginning and end of the line with screws. 5. Installing the first part of the net ✔ ???? Apply the first part of the net to the pipe, starting from the socket side, to prevent the net from curling up when inserting the filter into the ground. ???? You can temporarily secure the net with adhesive tape, which you will remove after installation. ???? For a pipe with a diameter of 160 mm, the overlap should be 2.5 cm. 6. Installing the second part of the net ✔ ???? Apply the second part of the net to the pipe, ensuring at least a 10 cm overlap at the junction with the first part. ???? You can trim the excess net with scissors or leave a larger overlap. 7. Wrapping the pipe with a longer piece of line ✔ ???? Wrap the pipe with a longer piece of line (16 m), pulling it tightly while wrapping so that the net is firmly attached. ???? Secure the beginning and end of the line with screws. ???? After wrapping, remove the auxiliary adhesive tape. 8. Additional protection ✔ ???? For additional stabilization, you can secure the beginning and end of the filter with reinforced adhesive tape. ???? Make sure that the screws do not protrude into the pipe so that they do not interfere with installation or operation of the pump. If necessary, shorten the protruding screws. PDF instructions for download: https://uniwoda.pl/wp-content/uploads... #filtr #DYI #studnia #głębinowa #siatka #SP16 #żyłka