#RepairRenault #DusterBearing #HubBearingReplacement #RenaultDuster #VideoLecture You can buy TORQUE products in Samara in the online store https://megalogan.ru/ or http://salytavto.ru/ as well as on federal sites: https://www.autodoc.ru/ https://www.part-kom.ru/ and https://www.exist.ru/ Front hub bearing number for Renault Duster TORQUE DAC42800039ABS. Detailed video instructions for replacing the front hub bearing on a Renault Duster. This video will help eliminate the problem of humming while driving or play in the front wheel. Important questions that will be raised and discussed in the release: how to remove the ABS sensor, all the tightening torques of bolts and nuts, how to remove the front suspension knuckle correctly, how to press out the front hub bearing, the sizes of the mandrels for pressing out and pressing in bearings, how to remove the race from the hub without damaging the hubs, what you need to pay attention to if you are changing the bearing in the service. The video is also suitable for the following operations: replacing the front suspension knuckle Renault Duster, replacing the ABS sensor Renault Duster, replacing the front hub Renault Duster. Front ABS sensor number for Renault Duster BOSH 0265008941. Video about replacing the rear hub bearing on Renault Duster 4x4 • REPLACING THE REAR HUB BEARING ON A R... Important tightening torques for bolts and nuts when replacing the front hub bearing on a Renault Duster: Front wheel mounting bolt 90 Nm, Tie rod end ball joint pin nut 37 Nm, Shock absorber strut to steering knuckle nut 180 Nm, Front wheel hub mounting nut 280 Nm, Ball joint to front suspension arm nut 75 Nm, Brake disc to hub flange bolt 14 Nm. Contents of the repair on replacing the hub bearing on Renault Duster: 0:00 intro 0:45 What is today's video about 0:52 Removing the front wheel 1:30 Tear off and unscrew the hub nut 2:47 Soak the splined part of the CV joint and knock it off the hub 3:37 Tapping out the brake disc bolts 4:00 Unscrew the disc bolts 4:30 Unscrew the steering tip nut and remove it from the knuckle 5:57 Trying to remove the ABS sensor from the knuckle 7:57 Release the ABS sensor harness 9:47 Unscrew the brake caliper from the knuckle 11:58 Unscrew and pull out the ball joint from the knuckle 15:06 Removing the drive from the hub 15:16 Unscrew the knuckle mounting bolts to the shock absorber strut 16:00 Removing the knuckle with the hub, brake disc and bearing 16:28 Removing or BREAKING the ABS sensor 18:00 Removing the brake disc 18:38 The size of the mandrel for pressing out the hub 19:16 Pressing out the hub from the bearing 20:37 Removing the hub bearing retaining ring 22:21 Preparing the OLD bearing for pressing out 23:17 The size of the mandrel for pressing out the bearing from the knuckle 23:47 Pressing out the hub bearing from the knuckle 24:14 Mandrel for final removal of the bearing from the knuckle 24:44 Removing the hub bearing from the knuckle 25:05 Cleaning and preparing all working surfaces of the knuckle 26:30 Preparing the surface ABS sensor installation 27:03 Important point before pressing in a new bearing 27:29 Selecting a bearing - which one do we use 27:39 Review of the hub bearing on Renault Duster TORQUE DAC42800039ABS 28:10 Where can I buy such a bearing 28:25 Pressing a new bearing into the knuckle 30:19 Installing a retaining ring 31:13 Removing the bearing race from the hub and preparing it for pressing 31:53 How we dismantled the bearing race 33:07 Pressing the hub onto the bearing in the knuckle 34:00 Preparing work areas on the suspension for installing the knuckle 34:47 About the new ABS sensor 34:58 Assembling everything in reverse order ----------------------------------------------------------------------------------------------------- Instagram - useful tips from repair and spare parts every day: / remontrenault Become part of the Renault Repair team: / @zenicom Decoding the VIN code and equipment of your Renault: http://www.donationalerts.ru/r/petrth...