117,109 views
If you install piles without taking these nuances into account, you will inevitably encounter problems! In this video, I will tell you why piles are needed and where they should not be placed. And at the end of the video, I will name the TOP four common jambs when installing piles and give instructions for solving them! Watch until the end! • ALL ABOUT UNLOADING A FINISHED BATHHOUSE IN 15 MI... - a video about dismantling entrances. In this video, we put a bathhouse and a utility room on piles. I recommend watching. Recommended sizes of piles for baths. Heads come in different sizes from 100x100 mm and larger. For a bathhouse made of 100x150 timber, we recommend using a head of at least 150x150. And for a bathhouse made of 150x150 timber, we recommend a head of 200x200. A pipe diameter of 89 mm or 108 mm is sufficient. We recommend using 89 mm for a bathhouse made of 90x140 timber, or for any frame bathhouse. 108 diameter for bathhouses made of 150x150 mm timber. We recommend using a pile length of 2.5 m. With this length, the pile is immersed in the soil by 1.9 - 2.2 m. Let me remind you that the distance between the piles should not be more than 2 meters. Otherwise, the foundation of the bathhouse may sag under its weight. Therefore, the more often the piles are placed, the better. For questions about purchasing a ready-made mobile bathhouse, call the toll-free number: 📞 8-800-350-03-93 🔶 Our website: https://sparom.ru/?utm_source=youtube... 🔷 Instagram: / bani_1 🔶 Vkontakte: https://vk.com/sparom 🔷 Odnoklassniki: https://ok.ru/group/55228012822673 🔶 Twitter: / bani_sparom 🔷 Yandex Zen: https://zen.yandex.ru/bani