My RUTUBE https://rutube.ru/channel/33121931/ The needle hits the shuttle and breaks, how to fix it and increase the stitch length on the Podolsk 2M. Video #259. In this video you will see: 00:00 How to remove the shuttle. 00:38 The shuttle is beaten by needles, this can cause the machine to break the thread, how to fix it. 02:03 The shuttle nose does not fit the needle correctly. 03:34 How to raise the needle bar up on the Podolsk 2M sewing machine. 04:46 I check the loop formation on the thread, how the shuttle nose fits the needle and takes the loop from the needle, after adjustment. 06:23 How to assemble the shuttle device and correctly install the sliding plate. 07:48 Checking how the machine works on the material, adjusting the stitch. 11:35 Short stitch length, how to double it. 14:09 How the machine sews thick jeans, with an extended stitch and thread number ten. Master Universal sewing machines repair training. More than 877 videos on repairing household and industrial sewing machines. Each brand of machine has its own playlist. Each video has its own number. Go to the playlists, select the desired brand of machine, there are all the videos on repair. My contacts. Mail: [email protected] [email protected] VKontakte: https://vk.com/id329324685 Website: http://vadelina.ru/ Section: For those who sew. My RUTUBE https://rutube.ru/channel/33121931/ My Telegram: https://t.me/+pBg52AiO0Lw0ZTli Page of training videos: Do it yourself! http://vadelina.ru/dlya-tekh-kto-shet/ Devices for sewing in a long zipper. Devices for edging fabric edges with bias tape. Devices for making bias tape. Snail for double turning of the fabric edge. Do-it-yourself edgings: for EVA car mats, in three folds, in four folds, for hard-to-slide materials of artificial leather, see here http://vadelina.ru/dlya-tekh-kto-shet/ Sewing machine with double feed and walking foot: Installing the shuttle, factory adjustment of the needle bar http://vadelina.ru/ustanovka-chelnoka... Adjusting the overstitching. Adjusting the eccentrics of the walking foot and the toothed feed dog http://vadelina.ru/kak-otregulirovat-... Industrial sewing machine class 862: http://vadelina.ru/dlya-tekh-kto-shet/ How to install and adjust the tension and release mechanism of the upper thread. How to set the eccentric for advancing and lifting the toothed feed dog. How to change the bronze gear and bearing on the shuttle roller. How to install and adjust the shuttle. How to install and adjust the shuttle take-off device. Typical GK 6150H and other similar machines: see here http://vadelina.ru/kak-postavit-cheln... How to install the shuttle, set the factory setting of the needle bar and adjust the eccentric. on Typical GK 6150H and other similar machines. Setting up the Podolsk sewing machine for thick leather and thick shoe threads. Supplement to the Podolsk machine setting for thick threads and thick leather. Setting up the Chaika 142M and Podolsk 142 machines for thick leather and thick shoe threads, See here http://vadelina.ru/dlya-tekh-kto-shet/ sewing machine, sewing machine, sewing machine repair, sewing machine setting, thick threads, thick leather, how to sew thick leather, sewing house, sewing repair, machine setting for leather, Podolsk sewing machine