Silent blocks of the rear beam FIESTROCO for HYUNDAI SOLARIS and KIA RIO3 number 11K1134 You can buy at the link https://ozon.ru/t/ZK0W6WP or in stores https://www.autodoc.ru/ https://www.exist.ru/ https://emex.ru/ Today in the video lecture we will show how to change the silent blocks of the rear beam on the Hyundai Solaris patient. This replacement is similar to the KIA RIO3, Cerato, i30, i40, and other Korean-made cars with an elastic rear beam. In the video we will tell you how to properly remove the rear spring, how to unscrew the bolts of the silent block of the rear shock absorber and beam, how to properly tighten the suspension after replacement, how to change the ABS sensor of the rear wheel, replace the rear suspension spring, what tool to perform this repair, etc. Tightening torques: Bolt of the lower shock absorber mount - Tightening torque 105 N m Rear wheel hub bearing nut - Tightening torque 175 N m Nut of the bolt securing the rear suspension arm to the body bracket - Tightening torque 125 N m Nut of the silent block of the rear beam 125 N m Bolts of the support bracket - 62 N m REPAIR CONTENT 0:00 IN THE VIDEO WILL BE 0:28 INTRO 0:35 WHAT THE VIDEO IS ABOUT 1:01 WHAT YOU NEED FOR REPAIR 1:38 REMOVE THE REAR WHEEL AND CLEAN ALL BOLTS 2:15 REMOVE THE HANDBRAKE CABLE FASTENER 2:23 CLEAN THE SPRING AREA, THREAD OF THE BOLT AND THE SHOCK ABSORBER NUT 2:36 UNSCREW THE BRAKE HOSE FASTENING BOLT 3:32 CLEAN AND LUBRICATE THE REAR BEAM BUSHING BOLT 3:51 TEAR OFF THE REAR BEAM BUSHING BOLT 4:06 SUPPORT THE BEAM WITH A HYDRAULIC STRUT 4:17 UNSCREW THE SHOCK ABSORBER FASTENING NUT TO THE BEAM 4:47 WE REMOVE THE BOLT FROM THE SHOCK ABSORBER, LUBRICATE AND CLEAN IT 5:10 WE UNSCREW AND REMOVE THE BOLT OF THE BEAM BUSHING, CLEAN AND LUBRICATE IT 5:25 BEFORE REMOVING THE BEAM, IT IS NECESSARY TO CLEAN AND LUBRICATE EVERYTHING 5:48 WE LOWER THE BEAM FROM THE BODY EARS 6:12 WE RELEASE THE ABS SENSOR 6:31 WE SHOW THE TORN BUSHING AND THE PROBLEM 6:40 WE CLEAN THE BUSHING AND THE AREA OF ITS PRESSING 7:06 ABOUT THE MARK ON THE BUSHING BLOCK AND HOW TO PRESS IT CORRECTLY 7:20 ABOUT REMOVING THE SILENT BLOCK FROM THE BEAM 8:23 HOW WE REMOVE THE SILENT BLOCK FROM THE REAR BEAM 9:46 CLEANING THE AREA OF THE SILENT BLOCK PRESSING 10:09 WHICH SILENT BLOCKS ARE BEST TO USE DURING REPAIR 10:53 WHAT MANNERS AND DEVICES ARE NEEDED FOR PRESSING THE SILENT BLOCK 12:15 BEFORE PRESSING WE WILL MAKE ANOTHER MARK ON THE BODY OF THE S/B 12:32 LUBRICATE THE BEAM EAR WITH CONSISTENT LUBRICANT 12:41 PRESSING THE SILENT BLOCK INTO THE BEAM 13:46 WATCHING RESULT 14:03 ASSEMBLE IN REVERSE SEQUENCE 14:58 TIGHTEN THE BUSHING BOLT BUT DO NOT TIGHTEN IT 15:12 INSERT THE SHOCK ABSORBER BOLT AND THE SHOCK ABSORBER ITSELF INTO THE BEAM 15:32 INSTALL ALL THE BOLTS OF THE HANDBRAKE AND BRAKE HOSE AND ABS 15:48 ABOUT TIGHTENING THE REAR BEAM BUSHING BOLT 16:28 CONCLUSIONS FINAL #ZENICOM #VIDEO LECTURE #CAR SERVICE #CAR REPAIR #SILENT BLOCKS #REAR BEAM #VIDEO LECTURE #REAR_BEAM_SILENT_BLOCKS #ZENiCOM #REMONTHYUNDAI ------------------------------------------------------------------------------------------------------ Instagram - useful tips from repairs and spare parts every day: / remontrenault Become part of the Renault Repair team: / @zenicom Decoding the VIN code and equipment of your Renault: http://www.donationalerts.ru/r/petrth... Today in the video lecture we will show how to change the silent blocks of the rear beam on the patient Hyundai Solaris. This replacement is similar to KIA RIO3, Cerato, i30, i40, and other Korean-made vehicles with an elastic rear beam. In the video, we will tell you how to remove the rear spring correctly, how to unscrew the bolts of the silent block of the rear shock absorber and the beam, how to properly stretch the suspension after replacement, how to change the rear wheel ABS sensor, replace the rear suspension spring, what tool to carry out this repair and so on ...