124,076 views
Before gluing, the car must be kept for 2 hours after the paint booth. The glass on the car does not have rubber seals, so in this case, a primer-free kit is suitable (the activator in it also acts as a primer). We attach suction cups to the glass, try the glass in the opening. Then degrease the surface for gluing - we use 2 degreasers on different bases. Using a special scraper, we cut off the layer of old glue, while the thickness of the remaining part should not exceed 1-2 mm. Now we degrease the glass in the same way as the gluing area. Lightly shake the bottle with primer and apply it in a thin layer and in one motion, without going over the same place twice. 5 minutes after applying the primer, you can apply glue. At the end, be sure to make a "lock" about 5 cm long. Glue the glass, then fix it with tape for the drying time. The car can be used no earlier than 1 hour after gluing.