2,674 views
In this video I will show you how to make a quality ink pad with a laser engraver and I will make a comparison with EVA foam. The diy laser ink pad is easy to do yourself. The depth of the stamp engraving is between 0.6mm and 0.7mm WEBSITES: Lettering of the miniature: https://www.textstudio.fr MATERIALS USED AND ACCESSORIES: EVA foam: Local trade for my part otherwise there is Amazon: https://www.amazon.ca/-/fr/feuilles-c... Titebond III glue Cyanoacrylate glue and activator: https://normand.ca/ca_fr/adhesif-supe... Rubber:https://www.amazon.ca/gp/product/B09B... Trodat ink pad: https://www.amazon.ca/-/fr/Trodat-enc... Parameter used with my Elegoo Phecda 20W engraver EVA foam: Demarcation 1000mm/min at 10% Filling 2000mm/min at 15% Cutting 925mm/min at 35% Rubber: Demarcation 1000mm/min at 20% Filling 1000mm/min at 65% Cutting 100mm/min at 90% Feel free to leave me a comment for any questions or suggestions. No affiliate links or sponsorships. The links in the description are only to help you find this product and have more information. WARNING: Never leave a laser engraver running unattended. Always adapt ventilation and/or PPE for all projects and equipment use. Always check if the product used with a laser engraver is toxic and/or suitable for this use. 00:00 Introduction 00:49 Lightburn 01:24 Engraving 01:56 Fabrication on support 05:02 Fusion 360/Prusa slicer case 05:48 EVA foam test 06:03 Rubber/EVA foam comparison 07:21 Conclusion