114,608 views
In this video I will tell you how to properly adjust and set the ignition after replacing the timing belt, removing for repair or replacing the distributor or ignition distributor. And the most important thing is that it is very easy to do it yourself. At the beginning of the video, all the timing marks are shown. Set the timing marks to the top dead center of the first cylinder. Then align the risk of the initial ignition timing angle with the mark on the gearbox bell. Install the distributor in place and align the runner mark and the risks on the distributor body. That's it, done. The runner points to the first cylinder. Put the cover on, throw on the spark plug wires and start the car. No strobe lights or specialists are needed. No need to listen for when the fuel pump turns on. Everything is very simple