35,535 views
There are a number of important points when preparing a screed. There are many grades of strength and other characteristics. How can we make a screed that will have good strength and be comfortable to work with? To make a high-quality mixture, we will need good cement, sand, a plasticizer and microfiber. Mix a mixture of cement and sand 1 to 3 and add a minimum amount of water. A big mistake is to add a lot of water to the mixture. In this case, it will not gain good strength and the result will be disastrous. The screed will be of very low quality and grade. With a minimum addition of water, the mixture is lumpy and not plastic, but at the output we get excellent strength. Working with such a mixture is quite problematic. And to solve this problem, we need a plasticizer. I use the time-tested plasticizer SikaPlast® Floor from Sika https://sikahome.ru/catalog/dobavki-v... . In addition to the fact that it gives the mixture high plasticity, when using it, we get a decrease in shrinkage and an increase in the durability of concrete. It is also important to use microfiber to get an excellent result. It prevents shrinkage cracks, increases the durability of concrete and is an excellent replacement for anti-shrinkage steel mesh. I use SikaFiber® PPM-12 RU fiber from Sika https://sikahome.ru/catalog/dobavki-v... Construction tool from REDVERG: https://редверг.рф How to get a project of our house: • Project of our frame house. About... Introduction: • How to build a cheap modern loft... Foundation in 2 days with your own hands. • TISE piles for 15,000 rubles. In 2 days for 72... **************************************************************** Support the channel with a ruble: https://donatepay.ru/don/LOFT Cooperation: 🔵 Mail: [email protected] 🔵 I'm on VK: https://vk.com/loft_diy 🔵 I'm on Insta: / loft_diy 🔵 I'm on Tg: https://t.me/loftdiy 🔵 I'm on Zen: https://zen.yandex.ru/id/5db01b9efbe6...