???? OUR NEWSLETTER ???? https://construyendocasascursos.com/n... ???? TAKE OUR FREE COURSES AND PROS ???? https://construyendocasascursos.com/c... SATE Foam ???? https://quilosa.com/fastpro/sate/ SATE Mortar ???? https://www.gecol.com/gecol-term/ All other accessories ???? https://www.calameo.com/soprema/read/... ⭐️ SUBSCRIBE ???? to not miss anything ???? https://n9.cl/eikof ???? WHO ARE WE BUILDING HOUSES? Our names are Javi Montero and Emiliano Montero, two cousins ​​who have been dedicated to construction our entire lives, passionate about this trade that we learned from our parents and that we now continue to perfect every day, with all the new developments that arise in this sector and thus this project was born, BUILDING HOUSES, which is nothing more than our way of contributing our grain of sand by teaching everything we know and what we continue to learn to anyone who is interested in this incredible world of construction. ????To carry out an SATE (Exterior Thermal Insulation System) installation in a maritime container, you must carefully follow a series of steps to ensure both the efficiency of the insulation and the structural safety of the container. Here is a step-by-step guide: Materials and Tools Needed ETICS panels (expanded polystyrene, mineral wool, etc.) ETICS adhesive Mechanical anchors (if necessary) Fiberglass mesh Base mortar Finishing mortar or final coating Basic tools (level, tape measure, drill, spatula, etc.) Personal protective equipment (gloves, glasses, etc.) Installation Steps 1. *Container Preparation:* Clean the surface of the container to remove any rust, dirt, or grease. Treat rusted areas with a rust inhibitor. Check that the surface is level and ready for installation. 2. *Layout Planning:* Measure and plan how the ETICS panels will be placed. Mark guide lines on the container for accurate placement. 3. *Adhesive Application:* Mix and prepare the adhesive according to the manufacturer’s instructions. Apply the adhesive in dots or stripes to the back of the ETICS panels. 4. *Placement of SATE Panels:* Place the panels on the container, following the guide lines. Press firmly to ensure good adhesion. If necessary, use mechanical anchors for additional fixation. 5. *Application of the Mesh and Base Mortar:* Cover the panels with a layer of base mortar. Place the fiberglass mesh on the wet mortar. Apply another layer of mortar to completely cover the mesh. 6. *Final Coating:* Once the base mortar is dry, apply the chosen finishing mortar or final coating. Ensure the surface is smooth and even. 7. *Inspection and Finishing:* Inspect the installation to ensure there are no cracks or poorly adhered areas. Perform any necessary finishing, such as sealing edges or painting. 8. *Additional Considerations:* Consider the need for ventilation and possible structural modifications. Ensure that the insulation does not negatively affect the structural integrity of the container. Additional Tips Always follow the manufacturer's instructions for the ETICS materials. Consider hiring a professional if you are not experienced in this type of installation. Make sure to comply with all local regulations and building codes. Performing an ETICS installation in a shipping container can be a challenging project, but with careful planning and meticulous execution, you can achieve effective insulation and transform the container into a comfortable, habitable space. -------------------------------------------------------------------------------------- CONTACT ????https://construyendocasascursos.com/c... --------------------------------------------------------------------------------------- Timestamps 00:00 Introduction 02:41 Materials 04:17 Starting Profile 05:37 Eps Board Installation 22:37 Foam Resistance Test 24:15 Doubts 25:48 Eps Board Installation 28:00 Mechanical Fixation 32:34 Screed Assembly 42:45 Finishing #construyendocasas