Free Washing Machine Course, Washers, Free Course, Class 01 Learn how a washing machine (washing machine) works in 10 free classes, operation and defects. ????https://cursoderefrigeracao.com/quant... The washing machine and washing machine course consists of 10 classes, these classes are arranged as follows: Class 01 - Introduction. In this Introductory Class, we will talk in general about the components that make up a washing machine, the main components such as: Motor, Brake actuator, electric pump, transmission, AIR inlet valve, pressure switch, pressure switch hose, pulley, belt, mechanics, electronic board, interface board, door lock and we will comment on the most common defects that washers or washing machines present. This free express washing machine course aims to help people who have no knowledge in the field, lay people or those who are starting out in the area of ​​​​washing machine repair. In terms of defects, we can mention parts and symptoms such as: Electric pump, responsible for throwing water out. When it is defective, the wash water remains in the tank and does not rinse. It may even present an intermittent problem, such as sometimes throwing water out, and sometimes not. Before replacing the electric pump, it is a good idea to open it and check that there are no objects inside its compartment, preventing the water from coming out. Brake actuator, a part responsible for releasing the gear, so that the machine can make the basket spin, thus performing the spin cycle. A common problem with this part is its breakage or the internal coils opening. The symptom is that the machine does not spin when spinning and instead of spinning the basket, it spins the agitator. If this is happening, check the brake actuator. Water inlet valve, this part is responsible for throwing water into the washer, that is, when you start the wash process, this valve throws the water that comes from outside and throws it into the tank. The problem is that water does not enter the washer's course, or water enters directly, without stopping, thus causing water to overflow over the tank. Washing machine and washing machine course Pressure switch, a part responsible for controlling the water level inside the washer. When the customer chooses which level to adjust using the button on the panel, it is the pressure switch that will know whether it has reached this level or not. A problem that can occur if the pressure switch is bad is water overflowing from the tank, or in rare cases, the water does not stop at the right level. The pressure switch has an adjustment, but this adjustment should not be changed, this adjustment is used in the factory to calibrate the part. Access our website through the links above and start studying right now, who knows, you might be able to fix or at least understand how your washer works. The washer repair course is WAITING FOR YOU. #WashingCourse #FreeCourse #WashingMachineCourse This washing machine course is sponsored by Tempermaq. CHECK OUT OUR OFFICIAL COURSE: https://tempermaq.com.br VISIT OUR WEBSITE WITH REPAIR TIPS: https://cursoderefrigeracao.com FOLLOW US ON INSTAGRAM / tempermaq