18,631 views
Today we will find out why the suspension is knocking on the Tiguan. In our service, the Volkswagen Tiguan 2020 car with a mileage of 107 thousand km, and we will start, naturally, with an inspection of the chassis. Before repairing the suspension, we check the shock absorbers, springs, anthers, play, bearings, pads and the condition of the silent blocks. Our inspection revealed a problem - the silent block has peeled off on one side, and on the other side, the silent block has fallen out of the outer race. By the way, this problem is relevant not only for the VW-Tiguan-II, but also for most cars on the MQB platform. So, we have to replace the silent blocks of the Tiguan. You will see how the silent block is pressed in and installed correctly, and receive recommendations for diagnosing the chassis. You will learn how to understand that it is time to change the silent blocks and where to look for them in the car. Watch the video and see you soon! Information about vacancies at EuroAuto: +7 (812) 458 04 60. Make an appointment at the EuroAuto service station: Write to the operator in the chat: https://vk.cc/bZyxs4 Call: +7 (800) 533-79-74 We are on social networks: VKontakte https://vk.com/euroauto Telegram https://t.me/euroautorussia Time codes: 0:00 Knocking suspension on Tiguan 0:16 Car suspension diagnostics 4:55 Detachment of the silent block on Volkswagen Tiguan 5:27 Removing the protection 5:54 Unscrewing the lever mounts 6:44 Replacing the silent blocks of Tiguan 8:32 Pressing in the silent block 10:22 Replacing the second silent block 13:22 Lubricating the silent blocks 15:04 Are we going to change the bolts? 15:34 Cleaning the ball joint studs 16:55 Why do we lubricate the ball joint studs and bolts? 19:07 Installing the levers 22:13 Completing the suspension repair 22:43 Checking the wheel alignment