56,646 views
Accessories: Belt https://amzn.to/3FOqQVU Winder https://amzn.to/3v8Uyjt A roller shutter (plural: roller shutters, less often roller shutters), in Swiss High German also the Store or Storen, in Swiss German mostly Store(n) (mask.), Austrian in the business area Rollbalken, is a roller closure that serves as an additional closure for an opening. It is usually mounted from the outside in front of a window or door and, depending on the design, can fulfill various protective properties, such as: burglar resistance, sound insulation, protection against light radiation (at night: street lamps, advertising, traffic lights as well as during the day), protection against sunlight, privacy protection and thermal insulation. Technically it is similar to a roller door. Belt winders - or inlet belt winders - are devices by means of which roller shutter belts are wound up. They are available for both manual operation (mechanical) and automated; In terms of installation, a distinction is made between surface-mounted (so-called swivel winders) and flush-mounted belt winders. The mechanical belt winder consists of a roller tensioned with a spring, in whose clamping device the end of the roller shutter belt is attached. When the roller shutter is pulled up, the belt is wound onto the roller due to the pre-tension of the spring. The roller shutter box is an enclosure around the roller space, in which the roller shutter and shaft are located when pulled up. With boxes provided on site (chipboard boxes, prefabricated boxes), sufficient thermal insulation is very important. Chipboard boxes consist of chipboard that is lined with insulating material. Since they are adapted, insulated and attached on site, it is difficult to achieve really good thermal insulation because draught gaps and uninsulated areas often arise. Therefore, prefabricated boxes are mainly used in new buildings these days. These are usually U- or L-shaped and are insulated on all sides from the start. Boxes that are attached directly to the window as part of the window (top boxes) are mainly made of plastic with an inner lining made of insulating material. Front-mounted boxes that sit in front of the window or on the masonry are usually made exclusively of aluminum and do not require thermal insulation as they are outside the heated shell. Older roller shutter boxes can also be sealed and insulated. (Source: Wikipedia) __________________________________________________________________________________________ Thank you for watching my videos. I would be very happy if you subscribe to my channel and leave positive feedback. My social media links: Instagram: / pduesp Facebook: / sascha.pduesp.9 Twitter: / pduesp The products shown in the video were all purchased by me. (An exception applies if this is specifically marked) All information and tips are without guarantee, general occupational health and safety regulations must be observed for all work. In the video description I provide you with links to the products I use (or similar), these links are affiliate links. By using the affiliate links you can support me so that I can continue to work for you. (This will not incur any additional costs for you) Kind regards, pduesp