Replace bearings on a washing machine motor
156,239 views
About :
Buy spare parts for washing machines https://tehremont.xyz/g60181826-zapch... My spare parts store https://tehremont.xyz Everything about repairing washing machines, refrigerators and vacuum cleaners https://sammaster.xyz Many people think that the hardest part is removing the small pulley from the engine shaft, yes of course this process is not easy, but there is a puller for this, which can be made in a few hours, and with your own hands. To make a puller, you will need a grinder, two channels and a screw from a vice. I did not show the drawing, as I think that a visual example is quite enough. Another nuance is that the pulley must be heated with a heater, a blowtorch is also suitable for this operation, but it is desirable that the tip of the fire be as thin as possible. After removing the guide pulley from the motor anchor shaft, you can proceed to disassembling the engine itself. The first thing you should do is find a trough in which the entire disassembly and assembly process will take place. It is important to understand that there are small washers in the motor, they cannot be lost, there are also shock-absorbing washers, which the bearings usually rest against. When the engine is dismembered, you can pull out the anchor and remove the front bearing with a puller, with the rear bearing everything is usually a little more difficult, since you need to remove the tachometer magnet, which is pressed to the shaft with a rivet. The video very clearly demonstrates how to drill out a rivet and remove bearings, here you also need to pay attention, or rather put marks near the bearings, this is necessary in order to press them into the same place where they stood Now let's talk about how to assemble a washing machine engine Although there are a lot of nuances here, it is important to pay attention to how I fixed the anchor, for this take an ordinary plastic bottle from under Fanta, cut off two rectangles, they will be our anchor clamps. Do not forget about the intermediate washers that are between the main iron and the engine body. Fastening nuts, it is advisable to use self-locking ones. After all the assembly, you will need to check the motor, for this you will need two jumpers, a wire with a plug and some kind of heating element - a heating element from a boiler or a heating element for a washing machine will do. Almost every master knows how to start a washing machine motor, but since I understand that you will probably do this for the first time, I clearly showed where to connect what. In general, you can learn about all this in the video, I think everything is explained very clearly and informatively there. Enjoy watching, subscribe to the channel
2,511,812 views 13 days ago
1,342,595 views 7 days ago
3,788,069 views 8 days ago
3,788,069 views 8 days ago
5,246,954 views 12 days ago
2,090,152 views 5 days ago
1,170,358 views 7 days ago
1,342,595 views 7 days ago
Google AdSense
336 x 280
336 x 280
Up Next
Splash
82,274 views
2 years ago
2 years ago
RECORD CABO VERDE
10,701 views
1 year ago
1 year ago
Lailson Cavalcante
133,600 views
9 years ago
9 years ago
Band Entretê
630,701 views
2 years ago
2 years ago
Escola do Amor - The Love School
30,310 views
4 years ago
4 years ago
The Noite com Danilo Gentili
2,230,633 views
6 years ago
6 years ago
bipolar yaşam derneği
1,849 views
1 year ago
1 year ago
Dr. Gülcan Özer | İnsan Halleri
94,553 views
1 year ago
1 year ago
Cansu Canan Özgen
122,411 views
4 months ago
4 months ago
bipolar yaşam derneği
21,949 views
2 years ago
2 years ago
Cansu Canan Özgen
436,836 views
5 months ago
5 months ago
bipolar yaşam derneği
408,264 views
6 years ago
6 years ago
Google AdSense
336 x 280
336 x 280