9,424,815 views
A leaking tap (mixer) is a common problem. Fixing a tap is very simple, a matter of five minutes! === My channel on Rutube https://rutube.ru/u/AndreyPolyakov Zen https://dzen.ru/andreipoliakov === Advertising / commercial offers - ???? write to the mailing address ???? [email protected] === You can thank, support the channel, donate for development here: ➡️ SberBank 4274 3201 0798 4315 ➡️ YooMoney 4100 1453 3215 949 https://yoomoney.ru/to/410014533215949 ➡️ https://www.donationalerts.com/r/fami... === A valve head (colloquially a crane box) is a device for supplying and closing water in two-handle faucets - for cold and hot water, respectively. Most often made of brass. Metal-ceramic axle boxes - in these boxes, water is supplied/closed using carefully polished metal-ceramic disks, usually made of aluminum oxide. The plunger in such boxes has a cylindrical shape with holes on the sides of the cylinder. The nozzle has two projections connected to the upper, movable disk. Both disks have slots for water supply (the upper movable one - V-shaped cutouts with which the projections of the nozzle connect; the lower fixed one - triangular-shaped windows). To open/close such a tap, you need to turn the flywheel 90 ° in one direction or another - then the slots either coincide (water flows) or overlap (no water). A thrust rubber gasket is inserted into the end of the plunger, pressing the lower disk to the upper one, thereby ensuring tightness. #faucet #faucetbox #faucet-axlebox #mixer