2,957 views
#renault #taurus #ignitionsystem #meksefe #platinum #timzipulley Hello friends; When installing the new platinum, you can adjust the gap by putting a feeler gauge or a piece of thick paper in between at the peak point of the camshaft, then fix the material in place. The platinum opens and closes 4 times in one revolution and produces a signal for the coil, so the coil works intermittently. After the assembly, you can check it by turning the engine from the propeller. Meksefe prevents the platinum from sparking when opening and closing, so the platinum is not damaged. If the coil is defective, it will strain the meksefe since it will draw too much current, the damage of the meksefe will cause the platinum to spark and damage the ends. The coil strengthens 12 vu between 20,000 and 25,000v and sends it to the ignition system. Weak and weak ignition is blue in color, since gasoline is hot fuel, it ignites somehow, but since LPG is cold fuel, some of it may not ignite and cause misfire. A strong ignition should be red as I showed at the end of the video. The reason for the misfire is the ignition system... meksefe, coil and distribution pulley should be mako. I hope it will be useful; You can support me by joining our channel, Thank you :)