Basically, it is important to ensure that the product is suitable and only choose an epoxy resin coating that is also suitable for garages. The product should also have a slip resistance value of R10-12 according to DIN so that staying in the garage does not become a slippery experience. STEDFLOOR Online Shop - https://www.stedfloor-shop.de/ Arturo products: www.arturoflooring.de Coating the garage floor with epoxy resin - step-by-step instructions In order for the floor coating to meet all expectations and have a long service life, it must be applied professionally and carefully. The garage floor must be checked and prepared beforehand. Step 1 - Prepare the garage floor Before applying the coating, it is important to remove contaminants such as dirt, oil stains or old coatings from the garage floor using special cleaners or mechanically. Damage and hollow spots must be identified and filled, for example with epoxy resin filler. The strength of the screed or concrete slab can be checked with a hammer or by scratching. If parts come loose during this inspection, the floor should first be solidified before the coating is applied. After repairs, the entire surface is sanded down. Step 2 - Sanding the surface Special equipment is required to sand a concrete floor in the garage. Concrete floors can only be sanded using diamond disks. For dirt, a diamond milling disk is usually used, which can also be found on hand-held devices. If the entire floor is to be sanded, larger machines with a milling wheel head are used for sanding. Don't forget to vacuum After sanding, the surface must be completely free of dust if it is to be coated. This must not be forgotten, otherwise the coating will not adhere. Simply sweeping is often not enough. Step 3 - The primer Arturo EP6600 Especially with absorbent surfaces, a primer must be applied before the scratch filler / flow coating. The coating material is used for this. The components are mixed well and quickly applied with a paint roller over the entire surface with little overlap. Caution is advised in high humidity and high temperatures. Condensation can cause stains. The ideal processing temperature is between 15 and 25 degrees. Step 4 - Apply scratch filler. Arturo EP6200 After 12-20 hours the primer has dried and the 2-component epoxy resin scratch filler layer can be applied. The epoxy resin scratch filler is applied evenly to the primer with a smoothing trowel. Step 5 - Pour the gradient coating. Arturo EP2500. Pouring epoxy resin can be both an artistic freedom and a technical challenge. To avoid air pockets when pouring epoxy resin, you should mix the resin and hardener slowly and carefully. After 12-20 hours the scratch filler has dried and the 2-component epoxy resin gradient coating layer can be applied. The epoxy resin is evenly applied to the scratch spatula with a toothed squeegee. Toothing 3.8mm. Step 6 - Seal the garage floor. Arturo EP3950 + solid glass balls. After 12-20 hours the gradient coating has dried and the sealing layer can be applied. The epoxy resin is quickly rolled out onto the gradient coating. ???? Are you looking for products for designing residential and public spaces? Then you are here: https://3dboden-shop.de/ Hello dear viewers, if anyone wants to get a master craftsman's certificate or something similar and needs techniques for wall design, they are welcome to use my techniques and apply them in the exam. Be sure to watch my other videos on the subject of wall design, and leave a like and subscribe if you liked the video and activate the bell so you don't miss any more videos. Brand name: STEDFLOOR Owner. Igor Sperling Bukarester Weg 5 67069 Ludwigshafen Homepage: https://www.stedfloor.com/ Telephone: Tel.: 0621-59285448 Mobile: 0157-74182985